Introduction
Being part of the DTF Printing industry and a business owner, you must have often heard some heated discussions going around about consumable waste during printing and testing and up-front costs before achieving your business success.
InkSoinc has been committed to providing customers with high-quality dtf printer at a reasonable price. We can also provide full and timely after-sales service to ensure that the establishment of our customers is smooth, running well, and shorten the unnecessary tryout time to reduce material waste.
What else can be done to save costs? InkSonic summarizes 10 cost-saving strategies that might just blow your mind and open up new ways of thinking. Though it may seem like small, insignificant adjustments, but could make a big difference in your bottom line in the long run.
10 Must-read Cost-saving Tips for Your DTF(Direct-to-Film) Printing
Whether you’re just starting out or have been in the industry for a while, these 10 cost-saving strategies will not only help you save money but also improve your efficiency and reduce material waste.
1. Reuse Excess Ink During Extraction
When extracting ink, do not let the extra amount go to waste. Follow the instructions in your machine's manual, try to recycle any extra ink back into the system. This small step could save you from wasting quite a lot of ink over time.
2. Follow a Regular Maintenance Schedule
Regular cleaning of the nozzles and parts of your printer will keep your machine in good shape for a long time and provide consistent performance. Clean the printheads whenever you notice some build-up on them to avoid clogs that may reduce print quality.
Related Articles
For a more detailed maintenance guide and checklist tailored to each Insonic model, be sure to explore these resources.
3. Replace Parts When Necessary
Don't wait for any component to break down. For instance, if you find any problem in the ink sac, replace it immediately to avoid further complications and potential printing errors. Timely part replacement can save you from costly repairs and material wastage.
4. Optimize the layout of your print task
This will save you on the number of prints required, minimizing film waste by optimizing the layout of your print tasks-increasing margins and arranging the images more efficiently. For instance, you won't have to print a design 100 times; instead, you can use the software to optimize the spacing of the images and print multiple designs on one film sheet. This simple adjustment helps you maximize material usage and reduce unnecessary waste.
5. Do Maintenance Before Long Periods of Inactivity
If you are not planning on using your printer for several weeks - say on vacation - then you need to go through an extended maintenance routine. Proper shutdown care will make sure that when you come back, the machine is ready and raring to go. Needless damage being caused is not a problem either. For holiday dtf printer maintenance, you might refer to this blog-Holiday Maintenance Tips for Your InkSonic DTF Printer
6. Shake Powder in a Large Container
When applying your transfers powder, catch the excess in a large container. Clean off the edges and shake off excess powder back into the container to reduce waste. This can also save you money on powder and may even help you keep your workspace cleaner.
7. Be There When the Machines Are Running
Always pay attention to the machine during operation. If there is anything that you feel is going wrong, stop the process right away to prevent wasting ink, powder, or material. Early intervention will help you avoid mistakes and inefficiency.
8. Always Do Nozzle Check Before Printing
Before printing, do a nozzle check for smooth and continuous lines. A quick check will assure you of better printing results and less material wasted on poor quality prints. Starting with a properly calibrated machine saves you time and resources.
9. Read the Manual and Watch Tutorial Videos
Read through the printer's manual and available tutorial videos before starting your print job. Not only will this prevent possible mistakes, but it will also allow you to take full advantage of the printer's capabilities. InkSonic offers 24/7 customer service and lifetime remote support, ensuring a worry-free shopping experience and seamless setup.
10. Choose the Right Printer for Your Needs
The moment you buy a printer, keep in mind your technical ability and level of maintenance you're ready to perform. For those with less hands-on experience, or novices, one should get a low-maintenance machine with automated ink filling, such as the XP600 A3 DTF printer. To achieve an optimum balance between cost and some setup effort, the R1390/L1800 A3 DTF printer might just be the best fit. For smaller designs and spare machine, a 8" (200mm) L8058 A4 DTF printer may be the most economical option for you.
Conclusion
These simple yet powerful 10 cost-saving strategies will help you optimize your DTF printing operations, reduce waste, and ultimately improve profitability. Be it a small business or just starting up, take advantage of the tips and use your equipment, time, and resources to achieve success in the long term in the world of DTF printing.
Ready to elevate your T-shirt business?
Use Code: Ink50
for a $50 off on your first order at InkSonic!
Market Research: Conrad
Conrad is InkSonic’s market research specialist. Since the company’s start, he’s been on top of the DTF printer market, knowing the pros of every model. He’s given many startup clients solid buying tips and profit strategies, helping them take that crucial first step.
