Raised stickers can be made with UV DTF varnish printing or resin doming, depending on the thickness and finish you want. With UV DTF printing, cured ink and multiple varnish layers create a glossy surface with a raised, tactile texture. Resin doming produces a thicker, rounded finish by applying a clear resin coating over a printed adhesive sticker. This guide focuses on how to make raised stickers using UV DTF printing, from preparing the artwork and configuring ink layers to laminating and applying the finished transfer. It also covers resin doming as an alternative for creating a more pronounced 3D effect.
What Creates the Raised, Glossy Effect on Stickers?
Raised stickers use different techniques to create a glossy, three-dimensional surface. The main differences lie in the materials and how the raised texture is produced.
Method |
Raised Effect |
Best For |
UV DTF + Varnish |
Printed ink and gloss layers |
Hard-surface transfers |
Resin Doming |
Thick, rounded clear resin |
Domed labels and decals |
Raised Spot UV |
Selective raised gloss |
Printed labels and packaging |
Puffy Foam |
Soft, thick foam |
Decorative sticker sheets |
-
UV DTF + Varnish: Uses UV-curable ink and varnish layers to create glossy, slightly raised details on transfer film. The finished design can be applied to compatible hard surfaces.
-
Resin Doming: Applies clear resin over a printed, cut sticker to create a thicker, rounded surface.
-
Raised Spot UV: Adds a raised gloss coating to selected areas of printed materials, such as packaging and cards.
-
Puffy Foam: Uses foam material to create soft, thick stickers. The raised effect comes from the material itself, not printed varnish.
These methods have different production processes. For example, Scodix raised spot gloss is a specialized commercial printing technique, while resin doming requires a separate resin application and curing process. Neither is simply another name for UV DTF printing. UV flatbed 3D relief printing is another approach that builds raised textures directly on an object's surface, rather than creating a transferable sticker with UV DTF printing. Learn more about UV flatbed 3D relief printing to understand how the two methods differ.
What Do You Need to Make 3D Raised UV DTF Stickers?
Making 3D raised UV DTF stickers requires a printer with varnish capabilities, compatible transfer films, and a lamination system. You will also need:
UV DTF printer: Supports CMYK, white ink, and varnish printing.
Inks: CMYK for colors, white ink for opacity, and varnish for glossy, raised details.
Transfer films: Compatible A film and B film.
RIP software: Supports selective varnish placement and multilayer printing.
Lamination equipment: An integrated or separate laminator compatible with the films and inks.
Application tools: Cutting tools, a squeegee, cleaning materials, and compatible test surfaces.
1. Check Varnish Printing Capability
Not every UV printer can produce raised gloss effects. Before choosing a 3D UV DTF printer, check whether it supports varnish ink, selective gloss areas, and multiple varnish layers. The RIP software must also allow control over varnish placement and buildup. These features determine how much texture and detail you can achieve.The InkSonic VF13 combines dual XP600 printheads, CMYK + white + varnish printing, an 11.8-inch print width, and integrated lamination. Its multilayer varnish capability supports subtle raised textures for 3D glossy transfers.
2. Check Film and Lamination Compatibility
UV DTF printing requires compatible A and B transfer films. The laminator must match the selected film and ink system to ensure proper bonding. Incorrect settings or incompatible materials can cause bubbles, wrinkles, or damage to raised details.
How to Make Raised Stickers With UV DTF Printing: Step by Step
Making raised stickers with UV DTF printing requires precise control over the artwork, white ink, and varnish layers. Unlike standard UV DTF transfers, the raised effect depends on where varnish is applied and how much it builds up during printing.Choosing equipment with compatible varnish capabilities is essential when producing raised gloss transfers. Explore our UV DTF printers to compare available printing configurations.
Step 1: Prepare the Design for a Raised Effect
Create the artwork at its final print size and use vector graphics where possible to keep lettering and outlines sharp. Separate the areas that need raised gloss from the standard color artwork, and avoid tiny details that may become indistinct under thicker varnish.
A coffee shop logo can use three separate layers:
Color layer: Coffee cup illustration and brand name.
White layer: Areas requiring an opaque white base.
Varnish layer: Selected lettering and cup outlines for raised highlights.
Step 2: Set Up the White Ink and Varnish Layers
Configure the ink channels in RIP software according to their functions:
CMYK: Prints the design's colors.
White Ink: Provides opacity on transparent or dark surfaces where needed.
Varnish: Creates gloss and builds the raised texture.
Use a varnish mask or spot-gloss setting to assign varnish to specific design areas. Check whether the printer supports multiple varnish passes and select a print mode validated for the chosen ink and film.
Varnish layer counts and curing settings are printer-specific. Excessive buildup can increase printing time, obscure fine lettering, and cause cracking, so test the manufacturer's recommended settings rather than applying a universal layer count.
Step 3: Print the Artwork on UV DTF Film
- Load Film A with the correct printable side facing the printheads.
- Check film alignment and tension to prevent printing shifts.
- Print using the configured CMYK, white, and varnish settings.
- Allow the printer's UV curing system to complete its normal process.
- Inspect the design before lamination.
Check fine lettering, color accuracy, white ink coverage, missing lines, and varnish placement. Misaligned varnish can leave raised highlights outside the intended design areas.
Step 4: Build and Check the Raised Gloss Finish
The 3D effect comes from controlled varnish buildup, not simply selecting a glossy finish in the artwork. Selective varnish creates raised lettering and logo outlines, while additional passes can produce more noticeable texture if the printer supports them.
Test three versions of the same logo:
-
Standard UV DTF: Regular glossy finish without extra raised varnish.
-
Raised Gloss Lettering: Additional varnish on the brand name.
-
Pronounced Raised Texture: More varnish buildup, within the printer's supported settings.
Compare the samples under angled lighting and photograph their side profiles. Check the raised height, edge definition, and readability. Excessive varnish can blur small details or create uneven edges, even when the overall gloss looks stronger.
Step 5: Laminate the Printed Film
Apply B film using the printer or film manufacturer's recommended settings. Keep both films aligned and check for bubbles, wrinkles, and uneven bonding. Inspect delicate raised details after lamination to make sure the varnish surface remains intact.
An integrated laminator completes printing and lamination within one system, while a separate laminator requires an additional operation.
Step 6: Cut and Apply the Raised Sticker
Trim the laminated transfer around the design.
Clean and dry a compatible hard surface using an appropriate cleaning method.
Peel the designated backing film.
Position the design before pressing it onto the surface.
Burnish evenly with a squeegee, paying attention to raised lettering and detailed edges.
Remove the carrier film slowly at the angle recommended by the film manufacturer.
Large designs and intricate raised details need careful, even pressure to prevent incomplete transfer. Test adhesion on curved, rough, or coated surfaces before applying the full design, and do not assume every plastic material is suitable for alcohol cleaning.
Step 7: Inspect the Finished 3D Gloss Effect
Check the finished transfer under angled lighting to confirm that the raised varnish is visibly glossy and evenly distributed. Run a finger gently over the design to identify rough edges or broken texture, then inspect fine lettering, adhesion, bubbles, and lifted corners.
Take side-angle and macro photographs of the finished sticker to document the actual raised height and compare different varnish configurations.
How to Make Raised Stickers With Resin Doming
Resin doming is an alternative to UV DTF printing for making 3D stickers with a thick, rounded finish. It involves applying a clear resin coating over a printed adhesive sticker rather than building raised details with printed varnish layers.
Basic Production Steps
Step 1: Print the Sticker Design
Print your artwork onto adhesive sticker material that is compatible with resin coatings. Make sure the ink is completely dry before applying resin to prevent smudging or surface defects.
Step 2: Contour-Cut the Stickers
Cut around each design, leaving enough space to contain the resin. Clean, well-defined edges help prevent resin from overflowing during application.
Step 3: Apply Clear Resin
Mix epoxy or polyurethane resin according to the manufacturer's instructions. Dispense it slowly onto the sticker, spreading it evenly while keeping the coating within the cut edges.
Step 4: Allow the Resin to Level and Cure
Let the resin settle naturally into a smooth, rounded dome. Follow the specified curing time and conditions, keep dust away from the surface, and use appropriate protective equipment and ventilation.
Step 5: Inspect the Finished Dome
Check for air bubbles, resin overflow, uneven edges, and incomplete curing. The finished surface should be smooth, transparent, and consistently rounded.
Resin doming is particularly suitable for product labels, logos, and decorative decals that need a thicker 3D finish.
What Designs Work Best for Raised Gloss Stickers?
The best embossed sticker designs use clear shapes, readable lettering, and selected glossy details. Instead of applying raised varnish across the entire artwork, focus on elements where added texture makes the design more noticeable.
|
Design Element |
Suggested Raised Effect |
|
Brand Logos |
Raised lettering and outlines |
|
Monograms |
Glossy initials |
|
Product Badges |
Selective glossy highlights |
|
Decorative Patterns |
Textured lines and shapes |
|
Illustrated Icons |
Raised details on selected areas |
Four design considerations help achieve better results:
Bold Typography: Thick lettering creates more defined raised edges. Very thin fonts may lose clarity when varnish builds up.
Selective Highlights: Apply varnish to brand names, logo outlines, or key graphic elements rather than covering the entire design.
Contrast Between Finishes: Combine raised glossy areas with flatter, less reflective sections to create visual depth. The result depends on the ink and printing configuration.
Simple Shapes for Testing: Start with letters, circles, and basic lines to test varnish output before printing complex artwork.
When preparing 3D glossy stickers, prioritize clearly separated varnish areas and shapes that can retain their definition after printing.
Where Can You Use Raised UV DTF Stickers?
Raised UV DTF stickers are suitable for adding glossy logos, lettering, and decorative details to compatible hard-surface products. Their raised texture works particularly well on:
-
Cosmetic Bottles: Decorate glass jars, perfume bottles, and compatible plastic cosmetic containers with custom logos and product names.
-
Bottles & Tumblers: Apply UV DTF decals to compatible glass bottles, stainless steel tumblers, and other smooth drinkware surfaces.
-
Phone Cases: Add raised initials, brand logos, or decorative patterns to compatible hard plastic cases.
-
Acrylic Gifts: Personalize acrylic ornaments, keychains, and gift items with custom 3D designs.
-
Branded Promotional Products: Apply raised logos and graphics to compatible metal, plastic, and glass merchandise.
Apply raised UV DTF stickers only to compatible hard surfaces, and test adhesion before using them on bottles, tumblers, or coated products.
Common Raised Sticker Printing Problems and How to Fix Them
Common UV DTF varnish problems can affect the raised texture, gloss consistency, and adhesion of finished stickers. Check the printing, lamination, and application stages to identify the source of each issue.
|
Problem |
What to Check |
|
Raised effect too subtle |
Varnish mode and buildup |
|
Uneven gloss |
Print settings, nozzle condition |
|
Blurry raised edges |
Artwork detail, varnish deposition |
|
Cracking |
Layer buildup, curing, bending |
|
Bubbles after lamination |
Film alignment and pressure |
|
Sticker peeling |
Surface preparation, adhesion |
Key troubleshooting points:
-
Weak raised effect: Check whether the RIP software supports multilayer varnish and whether the selected print mode allows additional buildup. More varnish does not always produce better results.
-
Blurry edges: Simplify fine artwork details or reduce excessive varnish buildup, which can obscure small lettering.
-
Cracking: Review varnish thickness, curing conditions, and surface curvature.
-
Lamination defects: Check film alignment and pressure. Lamination cannot repair defects already present in the printed design.
-
Peeling edges: Check surface cleanliness, material compatibility, and application pressure before blaming the printer.
Identifying the stage where the problem occurs helps prevent repeated printing and material waste.
FAQs About Raised Stickers
How do you create textured stickers?
Textured stickers can be made using UV DTF varnish for selective raised gloss, resin doming for rounded surfaces, puffy foam for soft thickness, or raised spot UV for highlighted printed areas.
Can a regular printer make raised stickers?
No. Standard inkjet and laser printers cannot directly produce UV raised varnish effects. However, they can print adhesive stickers for subsequent resin doming.
Are raised UV DTF stickers the same as epoxy stickers?
No. UV DTF uses printed ink and varnish layers to create raised details, while epoxy stickers use a separate transparent resin coating to form a rounded surface.
Can you make raised stickers without a UV printer?
Yes. Resin doming is an alternative that requires compatible adhesive sticker material, clear resin, and proper curing conditions.
Are 3D raised stickers waterproof and scratch-resistant?
It depends on the ink, varnish or resin, surface material, and curing conditions. Test water resistance, scratch resistance, and adhesion under actual usage conditions rather than assuming all raised stickers offer the same durability.
